M

Mr. Dubey • 52.30K Points
Coach 

Q. Starting gear used in Ward Leonard method

(A) is of small size
(B) is of large size
(C) size depends on application
(D) is absent
Correct : Option (D)

Explanation: 
 no special starting gear is required in ward leonard method of speed control. as the induced voltage by generator is gradually raised from zero, the motor starts up smoothly. speed reversal is smoothly carried out.

Share

Discusssion

Login to discuss.

Be the first to start discuss.

Related MCQs

Q. Power is transmitted by an electric motor to a machine by using a belt drive. The tensions on the tight and slack side of the belt are 2200 N and 1000

Q. In an open system, there is a transfer of which of the following quantity?

Q. In case of cooling towers, the ratio of the rates of heat and mass transfer is indicated by the __________ number.

Q. A 220V series motor takes a current of 35A and runs at 500rpm. Armature resistance of 0.25Ω and series field resistance 0.3Ω. If iron and

Q. Which of the following is least important in design during rapid prototyping?

Q. A screw is said to be over hauling screw, if its efficiency is

Q. 24 m, length of stroke = 0.6 m, length of connecting rod = 1.5 m, mass of reciprocating parts = 300 kg, mass of connecting rod = 250 kg; speed of rota

Q. During ultrasonic testing by the immersion method, it is frequently necessary to angulate the search unit when a discontinuity is located at an angle

Q. The stress which vary from a minimum value to a maximum value of the same nature (i.e. tensile or compressive) is called

Q. Cooling and dehumidification of air is done in summer air conditioning.