Q. Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when

Related MCQs

Q. If a1 and a2 are the relative volatilities when the pressure in the distillation column is 1 and 2 atm respectively. Pick out the correct statement.

Q. For lubrication of which part of an automobile only grease is used

Q. Exhaust valve temperature is about

Q. Translation semantics are used in.......

Q. A regenerative steam cycle renders ____________

Q. The most economical range of absorption factor is

Q. Three rods one made of glass, one of pure aluminium and one made of wrought iron are heated to 150?C. All the rods are 15 mm in diameter and 300 mm lo

Q. In a shaft, the shear stress is not directly proportional to

Q. Compression ratio of LC. Engines is

Q. When the connected members are very yielding (soft gasket) as compared to the bolt, then the resultant load on the bolt will be equal to the