M

Mr. Dubey • 52.70K Points
Coach 

Q. Pick out the wrong statement pertaining to the rotary dryer.

(A) Flights (located in the inside shell of rotary dryer) lift the material being dried and shower it down through the current of hot air/gases. It extends from the wall to a distance which is about 8-12% of the inside diameter of shell
(B) Hold up of a rotary drier is defined as the fraction of the dryer volume occupied by the solid at any instant. The best performance for rotary drier is obtained, when the hold up is in the range of 0.05 to 0.15
(C) Rotary dryer is suitable for drying sticky material
(D) Recommended peripheral speed of a rotary drier is in the range of 10 to 30 metres/minute
  • Correct Answer - Option(C)
  • Views: 760
  • Filed under category Mass Transfer
Share

No solution found for this question.
Add Solution and get +2 points.

You must be Logged in to update hint/solution

Discusssion

Login to discuss.

Be the first to start discuss.

Related MCQs

Q. The base of the shaper is not able to withstand the vibration.

Q. The process of extraction of the certain required amount of water from air is known as

Q. The formula, NI = 45000/(L/D), gives proper magnetising current for a coil, regardless of coil size as long as:

Q. Anti-knock for compression ignition engines is

Q. Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained

Q. In a four stroke SI engine the inlet valve opens

Q. With the increase in temperature, the holding time of the dough for cooling needs to be

Q. Unit of flow resistance is _________

Q. In a horizontal engine, reciprocating parts are retarded when the piston moves from

Q. Optical fibers are not immune to

Question analytics