The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?

Vikash Gupta • 33.56K Points
Instructor I

Q. The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?

(A) N010 GO2 X10 Y10 X5 Y5 R5

(B) N010 GO3 X10 Y10 X5 Y5 R5

(D) N010 GO2 X5 Y5 X10 Y10 R5

Correct : Option (A)

Discusssion

Be the first to start discuss.

Q. Which of the following is donor impurity for semi-conductors?

Q. A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the

Q. The presence of which of the following material in water is not considered to be dangerous?

Q. The density of water is maximum at

Q. movements?

Q. According to Indian standards, a bolt thread of 6 mm size of coarse pitch and with allowance on the threads and normal tolerance grade is designated a

Q. The energy consumption is a drawback of the foundry.

Q. What will happen, with the increase in speed of a DC motor?

Q. The economic life of a building is considered to be at an end under which of the following conditions?

Q. The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?

Discusssion

Related MCQs