M

Mr. Dubey • 52.66K Points
Coach 

Q. Maximum carbon content in welding is usually limited to

(A) 0.22%
(B) 0.8%
(C) 1.5%
(D) 2%
Share
Explanation by: Mr. Dubey 
 with increase of carbon, welding becomes difficult as weld becomes susceptible to cracks.

You must be Logged in to update hint/solution

Discusssion

Login to discuss.

Be the first to start discuss.

Related MCQs

Q. The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The mechanical power developed (slip = 3%)

Q. Approximate horse power that can be transmitted by a shaft 60 mm diameter at 180 r.p.m. with permissible shear stress of 850 kg/cm2, would be

Q. Approximately how many kg of air are required for the combustion of one kg of diesel oil?

Q. Two three phase induction motors A and B are identical in all respects except that motor A has a larger air-gap than motor B. Which motor will have po

Q. is a method where water is used as a medium for the flow of sewage from its production of the treatment unit.

Q. In case of electric traction, power supply frequency for 25 kV single phase system is

Q. The relation between the emissive and absorptive power of a surface is developed under

Q. Steady state heat transfer occurs when

Q. A steam turbine is basically an assemblage of ____________

Q. In a system subjected to damped forced vibrations, the ratio of maximum displacement to the static deflection is known as

Question analytics