Two steel rods connected by cotter joint are subjected to 50 kN load each. What is the minimum diameter required of the rods? (Given: Yielding Stress= 400N/mm² ; Factor of Safety=6)

Mr. Dubey • 52.30K Points
Coach

Q. Two steel rods connected by cotter joint are subjected to 50 kN load each. What is the minimum diameter required of the rods? (Given: Yielding Stress= 400N/mm² ; Factor of Safety=6)

(A) 31mm

(B) 35mm

(D) 40mm

Correct : Option (A)

Explanation:

 d=√(4p/πσ) where σ= yielding stress/f.s ; d=30.90mm or 31 mm.

Discusssion

Be the first to start discuss.

Q. Heat transfer coefficient of a material with length l is

Q. Accelerometer is the transducer for

Q. If the production is done according to change in various product design easily then such manufacturing system is called as flexible system.

Q. The point at which the magnetism in a material cannot be increased even though the magnetising force continues to increase is known as the:

Q. Large sections usually have a somewhat lower permissible stress than small sections. This is due to

Q. Which of the following chemical is least poisonous?

Q. In case of a beam subjected to pure bending

Q. The Coriolis component of acceleration is taken into account for

Q. Pressure drop through plate tower as compared to that through packed tower, for the same duty will be

Q. Two steel rods connected by cotter joint are subjected to 50 kN load each. What is the minimum diameter required of the rods? (Given: Yielding Stress= 400N/mm² ; Factor of Safety=6)

Discusssion

Related MCQs