Design of Steel Structures MCQs | Page - 31
Dear candidates you will find MCQ questions of Design of Steel Structures here. Learn these questions and prepare yourself for coming examinations and interviews. You can check the right answer of any question by clicking on any option or by clicking view answer button.
M
Q. Maximum pitch of rivets, used in steel stacks, is limited to
M
Q. If R is the reaction on the bearing plate, the minimum moment of. inertia of the bearing stiffener provided at the support of a plate girder of overall depth D, the maximum thickness of the compression flange T, carrying total load W, is
M
Q. As per IS: 800, in the plastic design, which of the following pairs are correctly matched? Working Loads Load factor
(i) Dead load 1.7
(ii) Dead Load + imposed load 1.7
(iii) Dead load + load due to wind or 1.3 seismic forces
(iv) Dead load + imposed load + load 1.7 due to wind or seismic forces Of these statements
M
Q. When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which moment in any rivet.)
M
Q. Minimum spacing of vertical stiffeners is limited to (Where d is the distance between flange angles)
M
Q. If P is the wind pressure in kg/cm2 , v is the velocity in km/hour and K is a constant of proportionality, then
M
Q. Study the following statements.
(i) Top lateral bracing prevents the sides-way buckling of the chord.
(ii) Sway bracing keeps the rectangular shape of the bridge cross-section.
(iii) Sway bracing transfers the load from top of end posts to bearings.
The correct answer is
M
Q. Water pressure in a 80 cm water main is 10 kg/cm2. The minimum thickness of themetal required for the water main, not to be stressed more than 200 kg/cm2, is
M
Q. The beams supporting the steps of a stair are generally known as Headers
M
Q. With usual notations of the letters, the shear stress fs at any point of the crosssection is given by
Jump to